Training: Capacity planning for rescue rigging: "The best-laid plans of mice and men often go awry"
Written by: Lance Piatt
"The best-laid plans of mice and men often go awry" or better said "The best laid schemes o' mice an' men" is a poem about "life, death, planning and strategy"... not always going as planned. According to legend, Robert Burns was ploughing in the fields and accidentally destroyed a mouse's nest, which it needed to survive the winter.
No matter how carefully a project is planned, something may still go wrong with it. The saying is adapted from a line in “To a Mouse,” by Robert Burns and speaks of both the complexity and strangeness of life. The components or elements of life is never fixed and can never completely be planned for. Jason Ilowite likes to say "plan for probably and not the possible"... this is a great place to start.
The two biggest questions in our world are...
This isn't some general concept or process, but rather a reckoning of purpose. There isn't a person on earth who doesn't face these questions... daily.
Think about it; work, school, family, chores, fitness, health, finances and faith. You do the best you can with what you know and you leave the unknown in a place of ‘highly unlikely’ and you move on. Robert Burns no doubt understand the strangeness of life and so it is here I want to quickly bring up a few things regarding a very small portion of our lives... rescue and rigging.
So what is "rescue"... in general it means "to save, free or deliver". And what is "rigging"?... Well in general it is to "set up, prepare and support". So our lives as rescue and rigging folks is to live our lives as to "set up, prepare and support those that need to be saved, freed and delivered". Sounds pretty heroic right? That's because you are! And to the degree our abilities align with our capacity... our success will be measured.
This week I asked RLA partner Mark Pfeifer "what is the biggest potential problem we face with rescue rigging"? His answer wasn't what I had planned on... He said "Capacity... Either not enough trained personnel or not the right training for personnel". And the more I thought about this the more profound it became and yet in my head it was obvious... "O mice, O men"
What is "capacity" anyway. Depending on the usage, both have to do with "containment" or "production". It could be said we deal with both, but for this blog... I am choosing "production". Thus Capacity is "the amount that something can produce". However, I will say that production done correctly will contain (constrain) or reduce risk factors as well and equipment has a ton to do with this.
Capacity Planning Strategy is a huge, even massive topic... however, I am going to be limiting my thought to the basic ideology of equipment. Mark also mentions that typically "more expensive the gear, generally the less staff required and easier the training (think winches) and less expensive gear, usually more staff and more training (think ATC guide)". Below are the Big 3 aspects of Capacity as it pertains to Production and Gear.
If we consider our goal of "efficient and effective" production, then rescue and rigging gear or equipment is a major focal point. Steve Crandall (from his book Rescue Rigging Concepts) says "it is easy for teams to get caught up in the world of rescue equipment. There are so many new devices and modern tools on the market that it seems like teams cannot survive without the latest and greatest innovation". He goes on to say "It is thought that if the team owns a lot of gear then they must certainly be ready for anything. Sadly, this is not the case. It is the knowledge base of the individual rescue and the collective capability of the team that makes the rescue happen; not the gear... equipment is just an adjunct to the training and skill".
The "collective" of training, knowledge and gear all work to increase the production (or output). I have been in this industry for over 2 decades and I can attest to the reality of having both a "lack of" and a "surplus of" training, knowledge and gear. It is the balance of all three that achieve success and not every team or individual will have the same balance.
There are thousands of gear solutions out there. There isn't a single solution that works 100% of the time, but there is Pareto Principle that holds true. I wrote a couple of blogs a while back on effective training and purchasing... Pareto Purchasing and 4 Steps To Do More With Less. The Pareto Principle essentially says that 20% of what we use or do accounts for 80 percent of what is really needed. I will admit, there is the possible over indulgence of this principle, but as a great rule of thumb it works.
So double down on the 20 percent that gets you the 80 percent.
So lets talk about gear.... Part of the 20
What gear do you have and are you actually using it? If not, put it away. Of the gear you do use:
What is the 20 percent?... Lets try this, but I have to admit to something... this is brutal and nearly impossible for me (I say nearly!). It is called the 5/25
Step 1. List 25 things that need to get done within all of the Gear/Equipment, Knowledge and Training bundles. It doesn't matter what they are or what category they come from. We have built a Blue Print for our courses... download it and see if these topic help.
Step 2. Ranking in order of preference, need or importance. Keep the same scale throughout. This can be an agonising task and it will surprise you.
Step 3. Take the Top 5. This is what you work on. The question now is what happens with the 20?... avoid them at all costs and only pick more up after you have accomplished the first 5.
So capacity has at its "core value"... production. The big questions are:
Your Big 3 of Equipment, Knowledge and Training will be in your 5. You might be have all 5 in one bucket or evenly spread out. It doesn't matter. Get those done and move on through.
Have fun with this stuff and we'll circle around later and break this down into some bite-sized morsels. Oh, what does all this have to do with "O mice O men"? Ploughing the fields of life will always cost someone something!
Source: Rigging Lab Academy