Fire stations of the world: City of Phoenix Fire Station 59, Arizona, US
The City of Phoenix Fire Station 59 is situated at 1111 S 65th Avenue in Phoenix, Arizona, in the US. Built in 2012, this modern-designed, four-bay fire station blends within the desert environment and complements surrounding industrial businesses. Keys to sustainability on this 13-bed, 20 000-square-foot, one-storey facility include insulated metal wall panelling, locally manufactured integral colour ground face concrete block units and a continuous horizontal steel shade canopy over the apparatus bay doors.
The Phoenix Fire Department had the authority to build four stations as part of a 2006 bond and its intent was to replace its Station 59 near a huge tank farm property. “The tank farm had been expanding, which meant that our station had outlived its efficiency because it was too small to hold the apparatus needed to respond to a tank farm emergency,” says Jim Zwerg, Phoenix Fire’s architect and facilities manager. “We needed a full-size, four-bay station for equipment and the expansion of apparatus. At the same time, the department was pursuing pod-type skid units on flatbed trucks, so we wanted an additional four-bay building behind the station for that equipment and storage.”
LEA Architects got the contract to design and build Phoenix Station 59, says Larry Enyart, LEA’s president. “We were hired to design the station and get Leadership in Energy and Environmental Design (LEED) certification and once we settled on the design, we decided to try for LEED Platinum, which the completed station was awarded.”
The department had LEA Architects design and build the four-bay storage building behind Station 59 that holds a Federal Emergency Management Agency skid truck and several preloaded pods, including a command office pod, a special operations pod, a hazmat pod and an aircraft rescue and fire fighting pod.
Phoenix Fire Department Station 59 must work as hard as the fire fighters living and operating inside its walls. As a unique living space that also houses equipment and fire trucks loaded with diesel fuel, the station was designed to not only protect fire fighters and paramedics from extreme heat, fumes, biological hazards and the demands of time-consuming maintenance but also provide sound acoustics to create quiet environments.
The modern architecture of the new City of Phoenix Fire Station No 59 responds to the desert environment as well as the surrounding industrial context. The cylindrical form of the fire station’s physical fitness room, cladded on the exterior with insulated metal wall panelling, with translucent glass fin fenestration metaphorically speaks to the fire stations primary mission requirement as a first responder serving the industrial context of the large surrounding fuel tank farm structures.
The use of natural materials for both buildings, including locally manufactured integral colour ground face concrete block units, the prevalent use of steel and perforated metal further relate to the industrial buildings near the site. The fire station’s west façade is protected from the harsh desert sun by a continuous horizontal steel shade canopy over the apparatus bay doors while the main entrance is protected by a deep roof overhang and a vertical shade screen of perforated metal.
Zwerg says that Phoenix Station 59 is 15 078 square feet in size, while the pod storage building is 5 677 square feet. “The station has four double-deep, drive-through bays, 13 dorm rooms, a full kitchen, a dining room, a day room and an exercise room,” he says. “LEA Architects designed the station with the potential to add a wing onto it for battalion use but that addition has not been done yet.” Total cost of the station complex was $5,2 million.
Enyart points out that the fire station’s west façade is protected from the harsh desert sun by a continuous horizontal steel shade canopy over the apparatus bay doors, while the main entrance is protected by a deep roof overhang and a vertical shade screen of perforated metal. “The west façade of the pod storage building mimics the west façade of the fire station at the apparatus bays,” Enyart notes, “with a continuous horizontal steel shade canopy to block the western sun.”
Other environmental touches on the station and storage building include a south-facing standing seam metal shed roof over the living quarters of the fire station that houses roof-mounted photovoltaic modules, while additional double-sided photovoltaic modules are located over the patio off of the kitchen, which double as a shade canopy.
Enyart says LEA Architects incorporated the use of local and regional materials to fit the LEED requirements whenever it could. “Masonry was made two miles away,” he says. “We used ground face blocks and poured-in-place concrete, as well as recycled floor materials for the workout room and also for components in the steel.”
Both buildings are designed to capture rainwater for water harvesting and irrigation uses, Enyart says and pervious pavers in driveway areas allow water to penetrate into the soil instead of running off into desert washes. “We also put in weathered steel fence posts with round pickets that you can see through to give the station area an open feeling,” he adds.
Inside the station, Enyart says LEA Architects followed Phoenix’s design guide and installed an all stainless steel kitchen, including cabinets, counters and countertops, door fronts and tables to be easy to clean and disinfect and resist bloodborne pathogens. Floors in the station are ground-coloured concrete, he notes and natural light woods have been used for office and storage cabinets and accents.
The dorm area has three captain dorm rooms and 10 fire fighter dorms, with three bathroom modules next to the dorm pods, where the central corridor is lit by solar tubes. “Each of the dorms faces to the outside and is set up to have operating windows,” Enyart observes. “Dorm pods have one bed, one desk and three lockers.”
Enyart says one of the biggest challenges of designing the station for the three-acre site was a west-facing egress. “That meant we had to look into strategies to mitigate the heat gain from the west facing of the building, which we did through use of materials and shade structures,” he says.
Zwerg points out that Station 59 works well in the light industrial neighbourhood. “Besides the tank farm, there are a lot of big box warehouse structures in the area, as well as farming and a large pallet farm nearby,” he says. “This station is set up well to handle any emergency in the area.”
Source: Echelon Masonry, LEA Architects, Adolfson and Peterson Construction